The foil design make easy higher space of the window area and so, there is no increase in the dimension of transformers. The inter layer capacitance of copper foil winding is greater than the winding made out of wire and so, the surge developed in a Copper foil transformer is equally distributed among all turns in less time than wire wound transformers, giving them higher surge with standing capability. The heat gets efficiently transfer from the internal layers to the external layers, the winding achieve thermal stability in a extraordinarily short time.

As the leading Industrial Transformers manufacturers and exporters in India, we offer customized on load transformer services as per customers’ expectation. The transformer manufactured with us not only saves power but also the life of equipment. We offer high rated on load transformers used across various industrial sectors successfully. Because of our technical expertise in mature technologies and experienced staff, we are able to establish ourselves as reputed Industrial Transformers manufacturers and exporters in India and worldwide. It has wide Range of Application like a Rectifier Transformer , Furnace transformer , Converter Duty transformer.

Industry sectors for Example the electro-chemical and melting Units Depend on small voltage high current DC supplies for process, which are supplied from sources known as rectifier transformers. The design objective of these high current rectifiers is to decrease the ripple as much as promising and hence reduce or remove the harmonics reflected back into the AC supply. The phase angle between star and delta secondary voltages is 30°.

Bureau of Energy Efficiency, Government of India, has bring out 'star rating plan,' from beginning to end which the distribution transformers are classified into '1star' to '5star' classifications. The transformers under '5Star' rank are the most efficient. Total loss info are predetermined both at 50% loading and at 100% loading for every star classification. The losses are to be reduced to improve efficiency. It will Improve By Changing In the Design of Core and Winding. By Using of Higher Grade of Core Material we can Achieve the Predetermine losses by BIS (Bureau of Indian Standard). We are Manufacturing BIS approved Transformer.

Isolation transformers provided With Copper isolation and are used to protect against electric shock, to suppress electrical noise in sensitive devices, or to transfer power between two circuits which must not be connected. This Shield Provided Between Primary And Secondary Winding For Protection of rectifier elements against voltage surges in winding. It is Used to Reduced current Densities to limit losses due to harmonic currents. It is also used to limit core losses due to harmonic fulx. An isolation transformer is a transformer used to distribute electrical power from a source of alternating current power to a number of equipment or device whereas isolating the powered apparatus from the power source, usually for protection reasons.

Bureau of Indian Standards (BIS) has brought out the revised standard IS 1180:2014, 'Outdoor Type Oil Immersed Distribution Transformers up to and including 2500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed.' In which They Have Different Categories Like BIS LEVEL-1 , BIS LEVEL-2 , BIS LEVEL-3 . This is in addition of the scope would carry India’s norms on efficiency more at par with other main countries such as USA, China and Australia. This standard is beyond 200 kVA and up to and including 2500 kVA and 33 kilo volts. Main Advantage of this to Limit Load Loss and No Load Loss at 50 % and 100 %. of Loading of Transformer. We are manufacturing all kind of BIS approved Transformer.

A compact substation is a ready-to-install product and saves on space, time and cost of a complete project. A factory assembled product typically houses MV switchgear, transformer & LV switchgears. This modular substation is an ideal solution for smart cities and finds its application across almost all industries due to its features: Factory assembled and ready to install Compact Construction Ease of access to components Reduction in installation space, cost & time

Description / Specification of Dry Type Transformer

We are involved in offering a wide range of Dry Type Transformer to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Dry Type Transformer. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

Features Of On Load Transformer

• Magnetic Circuit is made using step-lap design for lower losses and low magnetizing current of core by using high quality CRGO material with grades such as ZDKH, ZDMH, AMORPHOUS, MOH, etc.
• Electric Circuit is made using electrolytic grade with 99.99% pure High Quality Copper from our regular and reputed vendor HINDALCO & STERLITE with Foil winding in L.V coil of transformer.
• High Dielectric Insulation property to withstand lightening impulse and voltage surges.
• ONAN through natural convection for effective cooling through axial and radial ducts.

• ISI approved offload distribution transformer starting from 100 KVA to 2500 KVA under BIS-1180(Jan 2016) and above 2500 KVA up-to 5000 KVA under IS-2026 of all voltage class and covering all level of efficiency.
• Indoor/ Outdoor Pad Mounted
• Copper with multiple paper covering
• BIS-1180, IS-2026, IEC 60076 applicable standards

• Oil Cooled Distribution Transformers built with standard range of 250 KVA to 4000 KVA.
• Designed to give maintenance free long lasting operation for minimum 30 years.
• Copper Static shield provided between primary and secondary to protect transformer against disturbance.
• We take flux density lower to decrease core loss due to harmonic interference from inverters and thyristors.

Solar/Wind transformer is meant for converting the low voltage into high voltage and fed into a power grid. Thus this transformer is also known as Convertor Duty or Inverter Duty transformer. The transformer is designed in such a way that it can resist Harmonic currents caused by rectifier/inverter. Also, a Copper static shield is provided earthen separately to resist radio frequent disturbance. For such transformers, the design is done with multiple winding, for example, three winding or four winding transformers which make 6 pulses and 12 pulses transformer. Maintaining proper mechanical and electrical properties is the crucial part of designing such transformer ensuring good performance with the safety of all the electrical equipment.

Synergy Transformers Pvt. Ltd. is a well-known manufacturer of Furnace Transformers in Rajkot. We at Synergy Transformers are a team of engineers with expertise in the electrical field. We are engaged in the manufacturing of distribution transformers and special purpose transformers under the brand name SYNERGY. We firmly believe in quality and that too backed up by after-sales services to their installations throughout INDIA.

Since after the resolution passed by government for doing IS-1180 mandatory for the distribution transformer from JANUARY 2017 onwards, we have undergone large RESEARCH & DEVELOPMENT for achieving the goal of making BIS approved transformer up to and including 2500 KVA distribution transformer of all level of efficiency wiz:- LEVEL-1, LEVEL-2, and LEVEL-3.

Furnace Transformers are designed for induction melting and induction heating for ferrous and non-ferrous metal.

Induction Furnace has coil constructed from heavy copper tubing. it is designed and turned to the inverter circuit which applies a medium frequency (generally 500 Hz or 1000 Hz) voltage to the induction coil. The magnetic field produced by the induction coil induces eddy currents in the charge and heats it. Medium frequency is necessary to enhance the rate of heat generation.

• Indoor/ Outdoor Pad Mounted
• On Load / Off Load Transformer

Features Of Furnace Transformer

• Electrostatic earth shield provided between primary and secondary side windings for protection of rectifier elements against voltage surges in primary side windings. (Ref. D-2)
• Use reduced current densities to limit losses due to harmonic currents.
• Use reduced flux density to limit core losses due to harmonic flux.
• Designed to suit 6 Pulse / 12 Pulse or other rectifier circuits as required by furnace manufacturer. Two active parts in one tank can also be provided.
• Confirming to I.S. 2026 and I.S. 4540 – specifications for power transformer and specifications for rectifiers.

Synergy Transformers Pvt. Ltd. is a well-known manufacturer of Power Transformers in Rajkot. We at Synergy Transformers are a team of engineers with expertise in the electrical field. We are engaged in the manufacturing of distribution transformers and special purpose transformers under the brand name SYNERGY. We firmly believe in quality and that too backed up by after-sales services to their installations throughout INDIA.

Since after the resolution passed by government for doing IS-1180 mandatory for the distribution transformer from JANUARY 2017 onwards, we have undergone large RESEARCH & DEVELOPMENT for achieving the goal of making BIS approved transformer up to and including 2500 KVA distribution transformer of all level of efficiency wiz:- LEVEL-1, LEVEL-2, and LEVEL-3.

Power transformers are designed to be used for step-up and step down the application in the transmission network of higher voltages like 400 kV, 200 kV, 110 kV, 66 kV, 33kV, etc. The transformers are generally rated 200MVA and above. The designing makes the transformers 100% efficient in transmitting heavy load and high voltage i.e., higher than 33 kV. If compared to the size of the distribution transformers, these transformers are bigger and are used in transmission substations, generating station and application areas requiring high insulation levels.

We produce power electrical transformers of capacity up to 50 MVA, 3 Phase, up to 132 KV Class, ONAN/ONAF/OFAF/OFWF Cooling. Our transformers are popular for its trouble-free long performance, reliability and very competitive prices.

Features Of Power Transformer

• Designed for 25 years of trouble-free performance.
• Design conforms to IS 2026, IEC 60076, ANSI and other relevant standards.
• Low power loss and low noise.
• Designed to withstand electrical impulses and thermal and dynamic stresses.
• Optimum utilization of active materials for compactness.
• Modern manufacturing techniques ensure cost-effectiveness and reliability.

Optional Accessories

• Winding temperature indicator and oil temperature indicator with remote indication.
• RTDs for winding temperature measurement.
• Oil preservation system through air cell/thermosphyon filter.
• Neutral earthing bar with epoxy supports.

We are manufacturing many more products like

• On Load Distribution Transformer
• Offload Distribution Transformer
• Energy Efficient Transformer
• Furnace Transformers
• Star Rating Transformer
• Solar Transformer
• Rectifier Duty Transformer
• Inverter Duty Transformer
• Isolation Transformer
• Step Down Transformer
• Step Up Transformer